Home/Neutra Iron Control
AQ+ Ultra is a highly concentrated disinfectant, sanitizer and deodorizer.

Neutra Iron Control

Neutra Iron Control is a specially designed liquid sour that is used to neutralize residual alkalinity in linens and minimize the effects of iron and rust in the water supply. Also effective in water with high bicarbonate alkalinity to reduce graying and reduce the pH of the cleaned linens. Can be used as a normal sour in the final rinse, or used as a reclaim treatment when needed. For use in automatic injection systems.

8895 – 1/5 gal.

88915 – 1/15 gal.

88955 – 1/55 gal.

Product Downloads

For use in automatic injection systems

pH – 1-3

Appearance – Clear liquid

Boiling Point – 220°F

Solubility in Water – Complete

Flash Point – Not determined

For normal souring, add 1-2 ounces per 50 pounds of linen into the final rinse cycle. Safe to use in conjunction with softeners and starches. Use the pH Indicator to ensure that the final pH is between 6.0-7.0. For reclaiming discolored linens – disconnect all dispensing equipment to be sure that the sour is not mixed with other chemicals. Add 8-16 ounces per 50 pounds of linens into a hot water cycle. Allow to agitate for at least 15 minutes. Allow the machine to complete the remainder of the wash cycle to provide ample rinsing of linens. Check pH of finished linens, if pH is lower than 6.0, rinse the linens again or until the final pH is above 6.0. When finished, re-connect dispensing equipment. Consult your service technician for exact usage.

Water (7732-18-5)

Ammonium Biflouride (1341-49-7)

Hydroflourosilicic Acid (16961-83-4)