Water Extraction Carpet Cleaner
Water Extraction Carpet Cleaner is formulated for hot water extraction systems and provides an aggressive combination of ingredients for cleaning carpets that are loaded with tough soils. Designed for use where the soil load cannot be removed by surface cleaning. When this product is used in combination with Answer™ Multi-Use Carpet Cleaner, the combination salvages heavily soiled carpets. These environments often include schools, restaurants and industrial offices.
F534022 – 4/1 gal.
F534038 – 1/55 gal. drum (special order)
F534008 – 1/275 gal. tote (special order)
Product Downloads
Always thoroughly vacuum the carpet and remove any attached deposits from the carpet prior to use. If there is a question on the carpet’s colorfastness, always pretest in an inconspicuous area.
pH – 11.5 ± 0.5
Appearance – Light Blue, Liquid
Fragrance – Floral
Freezing Point – About 32°F
Solubility in Water – Complete
Flash Point – >200°F
- Mix at 1 ounce per gallon (1:128 ratio) of hot water. Use at 2 ounces per gallon (1:64 ratio) on heavily soiled carpets. For best results on traffic lanes, pre-spray with Answer Multi-Use Carpet Cleaner following label directions.
- Extract.
- Force dry the carpet with fans or carpet dryers.
Water – 7732-18-5
Tetrapotassium pyrophosphate – 7320-34-5
2-butoxyethanol – 111-76-2
Octenylsuccinic Acid – 28805-58-5
Sodium silicate – 1344-09-8
Dipropylene glycol monomethyl ether – 34590-94-8
