OFFense
OFFENSE™ quickly penetrates through floor finish buildup and suspends the stripped finish for rinse free removal. Low foam and low odor. Safe on most resilient and non-resilient floors that include mineral surfaces, terrazzo, concrete, vinyl, vinyl composition, asphalt, rubber, terrazzo, brick and quarry tile. Do not use on linoleum or tile that are in poor condition.
F218022 – 4/1 gal.
F218026 – 1/5 pail
F218038 – 1/55 drum
Product Downloads
Before stripping, always dust mop the floor and remove gum, labels and other attached soil deposits with long handled scraper or putty knife. OFFENSE™ can be used on vinyl, vinyl composition, vinyl asbestos, asphalt, marble, terrazzo, concrete and magnesite floors. Always use ‘CAUTION’ signs.
pH – 13.0 ± .3
Color – Liquid, Clear to Colorless
Fragrance – Solvent
Freezing Point – About 32°F
Solubility in Water – Complete
Flash Point – None to Boiling
- Dilute at 21 ounces per gallon (1:6 ratio) of cool water for normal buildup or 32 ounces per gallon (1:4 ratio) of cool water for extreme build up.
- Mop the diluted solution of OFFENSE™onto the floor. Let stand for 4-5 minutes, then agitate with the same mop. Do not allow solution to dry.
- Remove the remaining solution off of the floor using a mop or wet vacuum. For best results use a rotary machine and black pad. Do not let solution dry.
- Repeat steps two and three if any finish remains on floor. Rinsing may be required for dilutions stronger than 1:4.
SPECIAL PRECAUTIONS: Use caution as floors become very slippery. Must be diluted. Not for use on wood or painted surfaces. Not for use on linoleum or rubber floors or daily maintenance of resilient floors. Before use on asphalt tile, test a small hidden area for any color change.
Water – 7732-18-5
Ethylene glycol phenyl ether – 122-99-6
Monoethanolamine – 141-43-5
2-Butoxyethanol – 111-76-2
Sodium 1-octane sulfonate – 5324 – 84-5
