FullScrub Cleaner/Degreaser
Fullscrub® Cleaner/Degreaser is a great all around cleaning product. Its unique formulation is excellent for use in all types of equipment.
Can be used in walk-behind automatic scrubbers, riding scrubbers, high pressure sprayers, steam equipment, pump-up and hand held sprayers. Safe non-butyl formula.
9401 – 4/1 Gallon
9405 – 1/5 gal. Pail
94055 – 1/55 gal. Drum
Product Downloads
Fullscrub® Cleaner/Degreaser is recommended for use in schools, hotels, hospitals, factories, machine shops, trucking terminals, automotive repair facilities, etc. Excellent on trouble spots where accumulation of grease and grime are a problem. Fullscrub® works well in hot or cold water. Dilute according to application and soilage conditions.
pH – 9.0 ± 0.3
Appearance – Clear Green Thin Liquid
Fragrance – None
Freezing Point – About 32°F
Solubility in Water – Complete
Flash Point – None to boiling
Autoscrub Cleaning
- Dilute 1/2 ounce per gallon (1:256 ratio) in water for light soilage or dilute 2 ounces per gallon (1:64 ratio) in water for heavy soilage.
- Clean: Scrub with red pad. Apply Fullscrub®, scrub and pick up in one operation. Rinsing not required.
- Pick up trails: Use clean water and mop/bucket to pic up any trails left from autoscrubber.
Damp Mopping
- Dilute 1 ounce per gallon (1:128 ratio) in water for light soilage or dilute 4 ounces per gallon (1:32 ratio) in water for heavy soilage.
- Clean: Use a clean mop and damp mop the floor. Change the cleaning solution frequently.
- Rinse with clean, hot potable water. Squeegee excess water into a drain or pick up with a wet/dry vacuum.
General Cleaning
- Dilute 1 ounce per gallon (1:128 ratio) in water for light soilage or dilute 4 ounces per gallon (1:32 ratio) in water for heavy soilage.
- Apply: Spray or apply with a sponge, cloth or brush.
- Wipe dry.
Water – 7732-18-5
Sodium Tripolyphosphate – 7758-29-4
Sodium Salt of Linear
Alkylbenzene Sulfonate – 25155-30-0
Undeceth-7 – 34398-01-1
Sodium Xylene Sulfonate – 1300-72-70
