Home/Tile & Grout Cleaner
AQ+ Ultra is a highly concentrated disinfectant, sanitizer and deodorizer.

Tile & Grout Cleaner

Tile and Grout Cleaner is a blend of a mineral acid, detergents and water conditioning agents designed to remove alkaline scale and deposits on hard surfaces such as stone floors and other mineral based surfaces. Use to clean quarry tile, ceramic tile, brick or concrete.

Product Downloads

Tile and Grout Cleaner is a blend of a mineral acid, detergents and water conditioning agents designed to remove alkaline scale and deposits on hard surfaces such as stone floors and other mineral based surfaces. Use to clean quarry tile, ceramic tile, brick or concrete.

pH – 0 – 1

Appearance – Clear

Fragrance – Mint

Freezing Point – About 32°F

Solubility in Water – Complete

Flash Point – None to Boiling

Use caution when cleaning because floor may become slippery as a result of grease and oil residue. Remove all food equipment from area. Always test in an inconspicuous area first to insure no surface damage can occur. Do not allow product to come in contact with nylon carpet or polished marble.

Daily Cleaning:

  1. Dilute 6 oz. per gallon of water (1:20 ratio).
  2. Using a mop, apply product directly from mop bucket. Do not wring out the mop.
  3. Spread evenly over the entire floor using an aggressive deck brush.
  4. Allow to remain on surface for 5 minutes.
  5. Pick up residue with a clean mop or a wet/dry vacuum.
  6. Rinse thoroughly with clean water and dry with a clean mop.

Heavy Duty Cleaning:

  1. Dilute 32 oz. per gallon of water (1:4 ratio).
  2. Using a mop, apply product directly from mop bucket. Do not wring out the mop.
  3. Allow to remain on surface for 10 minutes.
  4. Scrub floor thoroughly with an aggressive deck brush or a 175 rpm floor machine equipped with an aggressive brush.
  5. Remove residue with a floor squeegee.
  6. Rinse thoroughly with clean water and dry with a clean mop.

Hydrogen chloride – 7647-01-0

Nonylphenyl Ethoxylate – 127087-87-0