Home/Appearance 25
AQ+ Ultra is a highly concentrated disinfectant, sanitizer and deodorizer.

Appearance 25

Appearance® 25 is a high solids floor finish that rapidly builds gloss with minimal coats. This acrylized formulation produces a clear, color-free, high-gloss finish that requires little maintenance.

Appearance® 25 produces a star-like shine when burnished. For use on vinyl composition, vinyl, rubber, asphalt, concrete, terrazzo, linoleum, rubber and sealed wood floors.

9651 – 4/1 Gallon
9655 – 1/5 gal. Pail
96555 – 1/55 gal. Drum

Product Downloads

Recommended on all types of resilient and non-resilient floors which include vinyl composition, rubber, asphalt, quarry, terrazzo and sealed wood floors.

pH –  9.0 ± 0.3

Appearance – Off-White Emulsion

Fragrance – Mild polymeric

Freezing Point – About 32°F

% Non-Volatile Solids – 25.0 ± 0.5

% Total Solids – 30.8

Boiling Point – 212°F

Solubility in Water – Dispersible

Flash Point – None to Boiling

Coverage – 1800-2200 sq ft per gallon (may vary due to differences in porosity of the surface)

Initial Application:

  1. Remove old sealer/finish using a Fullpro stripper and following label directions.
  2. Apply a thin coat of Appearance® 25 using a clean finish mop.
  3. Allow 20-30 minutes drying time.
  4. Apply 2-3 coats for best results allowing for adequate drying time between each coat.


  1. Dust mop the floor. Remove gum, labels, and other attached soil deposits with a long-handled scraper or putty knife.
  2. Damp mop or autoscrub using a Fullpro cleaner and following the label directions.

Water – 7732-18-5

Styrene acrylic polymers – Mixture

Diethylene glycol monoethyl ether – 111-90-0

Tri-butoxyethyl phosphate – 78-51-3

Polypropylene emulsion – Mixture